Quick Operation Mode - Teledyne T3SP Series Operator's Manual

Macro Properties: Select a Measurement Mode (see chapter 5) for
the currently selected item. In case the selected mode requires impe-
dance property settings, the Impedance Measurement Properties Win-
dow is opened (cp. section 5.1.3).
When performing measurements in macro operating mode, a descriptor in-
put dialog is raised after completion of the first macro measurement. This
description is used for all further macro measurements performed within
the current cycle. After measuring the last macro, the indicator automati-
cally jumps back to the first macro and a new description is requested. The
software automatically enumerates the description; however the string can
be overwritten according to the user's needs.
After finishing a macro measurement, the measurement is pushed into the
sample-list and can be treated like any measurement in sample-list opera-
tion mode.
Option: In case the user performs impedance measurements with a toler-
ance mask, an input dialog is raised in case the impedance trace is outside
the defined tolerance. This behavior can be changed in the advanced tab of
the Options Dialoġ

2.6.3 Quick Operation Mode

In case some quick measurements shall be performed without any need to
store the data and/or the results, the quick-measurement operation mode
can be used. When the quick operation item in the toolbar is pressed, the
user is asked to select the Measurement Mode (cp. chapter 5). In case the
selected mode uses impedance property settings, the Impedance Measure-
ment Properties Window can be opened at any time (cp. section 5.1.3).
In quick operation mode a permanent update of the trace in the Result Vi-
sualization Window can be activated ("live mode").
T3SP-Series Operator's Manual
22
931776 RevB