7. Workshop Files
The workshop files are intended to enable a quick start of measurements
with a (frequently used) base setup. By means of the main menu entries File
Save Workshop File and File
the software can easily be saved and restored in the workshop file (*.swsf).
The following settings/states are stored and loaded:
•
Current sample list
•
Current macro list
•
Location of last known Reference Measurement.
Automatic impedance masks positioning:
In a laboratory environment it may happen that the setup partially changes
from time to time. For example impedance measurements with predefined
tolerance masks require a constant measurement setup with respect to the
position of the mask position - this position varies with e.g. with the length
of the used cable.
A position-detection algorithm allows for an automatic adaption of the po-
sitions of the tolerance masks upon loading a workshop file.
Please note: to use this functionality it is very important that a current Ref-
erence Measurement has been made
T3SP-Series Operator's Manual
Load Workshop File the current state of
52
931776 RevB