Teledyne T3SP Series Operator's Manual page 57

Save As:
Recent Files:
Load Workshop File
Save Workshop File
Export:
Import:
Macro-List:
Install:
Print:
Print Preview:
Exit:
Saves the current sample list. A question di-
alog appears, if the file name already exists.
Open one of the recently used files.
Open a workshop file for restoring a macro
list, sample list and the last valid TTC/12TC.
Save the current the macro list, sample list
and the link to the current TTC/12TC.
Information of all selected samples will be ex-
ported to a file. The export format depends
on the selected export module.
Open the import module dialog.
Submenu for further information please
refer to sub-section 2.6.2.
Installs calibration kit datasets (CKD-files).
Furthermore a company logo (JPG-image)
can be installed, which should be approxi-
mately in a 2:1 format. Please be aware that
usually administrator privileges are required
to install the company logo.
Prints out brief overview information of cur-
rent project.
Shows the print preview.
Exits the program. If unsaved changes are
available in the project and/or the macro list,
a Save as user dialog is raised.
T3SP-Series Operator's Manual
57
931776 RevB