Teledyne T3SP Series Operator's Manual page 43

By typing the values in [ns] into the specific fields.
By capturing the current zoom of the oscilloscope window: zoom-
ing into the TDR-curve and pressing Extra
menu of the Impedance Measurement Properties Window.
By using the marker positions of the Oscilloscope Window: Ex-
tra Capture Markers in the menu of the Impedance Measure-
ment Properties Window.
By clicking Extra
Measurement Properties Window. Using this function requires a
completed impedance measurement of a transmission line with
an open-ended termination. Furthermore a reference measure-
ment is required (indicated by the yellow LED in the TTC indicator
field, see section 5.1.2).
•
For the user's convenience pre-defined impedance measurement set-
tings can be stored in and loaded from a template files (itx-files).
•
To create a properties template, specify the values and press the Save
Template button. It is recommended to save the template under a
meaningful filename.
•
To apply pre-defined properties to list elements in the Main Window,
proceed as follows:
Select all rows of the sample list in the Main Window to be set
according to the pre-definitions.
Open the Impedance Measurement Properties Window by right-
clicking one of the selected rows and pressing Properties.
T3SP-Series Operator's Manual
Set by Norm in the menu of the Impedance
Capture x-axis in the
43
931776 RevB