Adjustment - Christie APS Series Service Manual

10. Adjustment

10-1 Before adjusting
10-1-1 Selection of adjustment
When any parts in the table below are changed, choose the proper adjusting items with the chart.
Replaced part
DICHROIC OPTICS UNIT
(DICHRO ASY S F2-WU60 S)
LCD/Lens/Prism assembly
(LNS/PRM AS F2-WU60 S)
LIGHT SOURCE
(A9 LS HIGH ASSY SEV)
NTC-IN/OUT PCB
(PSA A9 NTC-IN PWB-S)
(PSA A9 NTC-OUT PWB-S)
MAIN PCB
(PSA MP-WU5603 MAIN S)
BOTTOM CASE
(F2 BTM CASE ASSY)
PANEL DUCT FAN
(A9 PNL DUCT FAN ASS'Y)
: means need for adjustment.
10-1-2 Setting of condition before adjustments
1. Warming up: Turn on the light source and keep
it on for more than 10 minutes before starting
adjustments.
2. Set the image size: Set zoom wide to Max. and
project an image more than 1 m (40 inches) in
diagonal size.
3. Resetting aspect and distortion of the image:
Press the MENU button and select EASY MENU -
RESET. Press the ► or ENTER button to display
RESET dialog and choose the OK with the ►
button. Set and adjust each item in the EASY
MENU again after adjustment.
4. Displaying the FACTORY MENU: Perform all
adjustments from the FACTORY MENU.
Using the remote control...
a. Press the MENU button and select EASY
MENU - RESET. Press the ► or ENTER button
to display RESET dialog.
b. Next, press the RESET button, then re-press
and hold the RESET button for 3 seconds or
longer (the FACTORY MENU will appear).
LWU650-APS/LWU530-APS
Service Manual
LWU650-APS / LWU530-APS
Relation between the replaced part and adjustment
AIR
PSIG Flicker
SENSOR
: means not need for adjustment.
White Color
balance uniformity uniformity
Using the control panel of the projector...
a. Press the MENU button and select EASY
MENU - RESET. Press the ► or ENTER button
to display RESET dialog.
b. Next, press the ▼ button first, then press and
hold the ▼ and INPUT button for 3 seconds or
longer (the FACTORY MENU will appear).
Move the cursor among the items of the menu with
▲ and ▼ buttons, and select and enter with ► or
ENTER button.
81
(Light)
Black
GHOST
Sensor
Calibration
: means recommended.
020-001522-01 Rev. 1 (11-2018)
LIT MAN SERV APS Series