Christie APS Series Service Manual page 51

■ Assembling of I-O COVER
x 6
M3x10 Silver 0.34±0.05N m
Tighten screws in order from 1 to 6.
■
Attachment of BLIND SHEET
X-shaped slit
LWU650-APS/LWU530-APS
Service Manual
LWU650-APS / LWU530-APS
DRIVE PCB
Insert X-shaped slit of BLIND SHEET
into screws.
50
USB COVER
(a)
M3x10 Silver
0.34±0.05N m
I-O COVER
Replacing the I/O cover
1. Remove the top case.
2. Remove the Main PCB assembly.
3. Disconnect the cell battery PCB
harness connector.
4. Remove the seven screws.
5. Remove and replace the I/O cover.
6. To reinstall the I/O cover, repeat the
above steps in reverse order.
020-001522-01 Rev. 1 (11-2018)
LIT MAN SERV APS Series