Christie APS Series Service Manual page 93

11-3 Reset of the Network Web User Account
Performing this operation initializes the network settings. If the projector has the customized network
settings, make a note of the network settings before this operation to restore them later.
1. Display the WIRED SETUP in the
NETWORK menu.
2. Select "OFF" in the item of DHCP.
3. Enter "255.255.255.255" in the item of
IP ADDRESS.
4. Enter "255.255.255.255" in the item of
SUBNET MASK.
5. Enter "255.255.255.255" in the item of
DEFAULT GATEWAY.
6. While NETWORK on the left column is highlighted, press the RESET button.
7. Select OK, and press ► button to execute reset.
The operation described above resets not only Web User Account but also NETWORK settings.
NOTE
When you execute this reset operation with any other settings than above (described in the step
2 to 5), the Network Control Password, Network Presentation Password, SNTP server address,
DATE AND TIME and other schedule settings are not initialized, but the network settings (DHCP,
IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY) are initialized.
8. If the network settings had been customized, restore them by manual operation.
LWU650-APS/LWU530-APS
Service Manual
LWU650-APS / LWU530-APS
ATTENTION
Press RESET button
92
020-001522-01 Rev. 1 (11-2018)
LIT MAN SERV APS Series