Christie APS Series Service Manual page 45

■ MAIN PCB
Wiring of MAIN PCB-1
Wiring of MAIN PCB B-side (the side which connector equipped on) (overall PCB)
Wire the cables according to the picture below.
Refer to the following pages for the details of how to wire.
EW71 : Connected to
(PHOSPHOR WHEEL motor flexible cable)
EA01 : Connected to (SPEAKER)
EW35 : Connected to
(PHOSPHOR WHEEL temperature sensor)
E806 : Connected to
(PHOSPHOR WHEEL FAN)
E804 : Connected to
(LD HEAT PIPE FAN 2)
EW34 : Connected to
(LD temperature sensor)
EW76 : Connected to (B Illuminance sensor)
E803 : Connected to
EP02 : Connected to (CNFREM)
(LD HEAT PIPE FAN 1)
LWU650-APS/LWU530-APS
Service Manual
LWU650-APS / LWU530-APS
P501, P601, P701 :
Connected to (RGB panel flexible cable)
44
Overall MAIN PCB B-side
(the side which connector equipped on)
E801 : Connected to (B PANEL FAN)
E802 : Connected to (G PANEL FAN)
EW32 : Connected to CNFL2
(Internal air sensor PCB)
E800 : Connected to CNMPW
(POWER UNIT CIRCUIT PCB)
E807 : Connected to (R PANEL FAN)
EW77 : Connected to
E805 : Connected to
(R Illuminance sensor)
(POWER UNIT CIRCUIT FAN)
020-001522-01 Rev. 1 (11-2018)
LIT MAN SERV APS Series
EW31 : Connected to CNFL1
(External air sensor PCB)