Christie APS Series Service Manual page 50

■ Attachment of BATTERY PCB
Attach BATTERY PCB
with adjusting to the hook.
BATTERY PCB
Connection of BATTERY PCB cable
Wiring of CNBAT
Refer to the following for wiring.
BATTERY PCB
Attachment of BATTERY PCB and connection to MAIN PCB
Wiring of CNBAT(BATTERY PCB cable)
BATTERY PCB
LWU650-APS/LWU530-APS
Service Manual
LWU650-APS / LWU530-APS
Hook
T3x12 Silver
CNBAT
49
Replacing the battery PCB
1. Remove the top case.
2. Remove the Main PCB assembly.
3. Disconnect the battery PCB harness.
4. Remove one screw.
5. Replace the battery PCB.
6. To reinstall the battery PCB, repeat the
above steps in reverse order.
MAIN PCB A-side (the side which input port equipped on)
EL50 : Connected to CNBAT
020-001522-01 Rev. 1 (11-2018)
LIT MAN SERV APS Series