Christie APS Series Service Manual page 67

■ PANEL DUCT ASSY - 2
Insert both ends of PCB into slits.
Make sure that PCB touches to the
bottom of PNL DUCT BTM.
Be careful that a connector does not
come off when wiring it.
Insert PCB into the slit after
connecting a connector to it.
Make sure that PCB does not
come off from the slit.
Refer to the following
page for the details of
attachment of
SENSOR PCB.
Attachment of sensor PCB
Make sure that 8 hooks are firmly engaged.
Attachment of PANEL DUCT UP
LWU650-APS/LWU530-APS
Service Manual
LWU650-APS / LWU530-APS
Completion
66
Wiring of sensor PCB cable
Wiring of CNFL1 and CNFL2
Refer to the following for wiring.
External air sensor PCB
Internal air sensor PCB
CNFL2
Internal air sensor cable
020-001522-01 Rev. 1 (11-2018)
LIT MAN SERV APS Series
CNFL1
External air sensor cable
Cable