Christie APS Series Service Manual page 41

■ UPPER CASE (UPPER CASE ASS'Y)
Disassembling
After removing FILTER COVER ASSY and AIR FILTER,
loosen and remove 13 screws on the bottom and 1 screw
on the back, and then lift the UPPER CASE upwards to
detach it.
Assembling
Attach UPPER CASE to the projector, and turn it over.
Tighten 13 screws on the bottom and 1 screw on the back
in numerical order from ① to ⑭ as shown in the drawing.
Use a specified jig.
Use a specified jig to assemble the UPPER CASE.
It prevents the projector from being bent or being damaged to its appearance when you assemble it.
M3x10 Silver
0.34 0.05N m
LWU650-APS/LWU530-APS
Service Manual
LWU650-APS / LWU530-APS
Tighten screws in order from 1 to 14.
M3x6 Silver
0.34 0.05N m
40
FILTER COVER ASSY
A hole cannot be seen : OK
A hole can be seen : Bad
T3x12 Silver
0.69 0.88N
020-001522-01 Rev. 1 (11-2018)
LIT MAN SERV APS Series
AIR FILTER
A hole cannot be seen : OK
A hole can be seen : Bad
A hole can be seen : Bad
Make sure that three fixing positions are firmly
engaged before assembling UPPER CASE.
If mesh is deformed and floating, assemble
UPPER CASE after correcting the deformation.
Mesh