Christie APS Series Service Manual page 81

Preparation of cables - 2
Attachment of AC cable (CNLPW) ferrite core
Attach four CNLPW cores (FER1/2/3/4)．
Make sure that the cores do not move after fixing them by SK03/SK04.
Connected to
CNLDF FPC for LD
Connector
Magnified
picture
FER1
SK03
LWU650-APS/LWU530-APS
Service Manual
LWU650-APS / LWU530-APS
Completion
Magnified
picture
Tape
FER1/FER3 ： Bundle and fix 3pin (black) and 4pin (black).
FER2/FER4 ： Bundle and fix 1pin (white) and 2pin (blue).
Fix FER1 and FER2 so that they will not be overlapped
FER2
as shown in the left picture in order not to be interfered
when attaching the top cover.
①Fix FER1 close to the connector.
②Fix FER2 away from FER1 with the space shown in the picture.
SK04
Pass SK03 and SK04 through the holes
(in a dotted red circle) of FER1 and FER2,
then fasten SK03, SK04 and the cables together.
80
Connected to CN203 on
POWER UNIT CIRCUIT
FER3
Attach FER3/4 on the right of the tape in the direction
shown in the picture.
(Only attached, not fixed by cable ties.)
Make sure to lock the core.
020-001522-01 Rev. 1 (11-2018)
LIT MAN SERV APS Series
FER4