Christie APS Series Service Manual page 72

■ POWER PCB FAN - 2
Adjusting the length of the lead by tape
Adjust the length of the lead by tape as shown in the following.
Adjusting the length of the lead of two POWER UNIT CIRCUIT FANs
POWER UNIT CIRCUIT FAN lead
Adjusting the length of the lead by sticking the tape
Magnified picture
LWU650-APS/LWU530-APS
Service Manual
LWU650-APS / LWU530-APS
The number of folding the cable
Fourth
Second
[Reference for folding back the lead]
Fold back the lead four times according to
the length shown above.
Wind a tape tightly at the center of folded lead.
Use ZTP04 (NITTO tape No.5 W9mm x L30mm).
71
Third
First
020-001522-01 Rev. 1 (11-2018)
LIT MAN SERV APS Series