Technical Information - Christie APS Series Service Manual

11. Technical Information

11-1 HIDDEN SERVICE MENU
 PANEL TIME
Use time of LCD panel. Reset the PANEL TIME whenever you changed the LCD/LENS PRISM
ASSY.
 LONG KEY
You can select the remote control button operation mode. NORMAL ↔ LONG
The LONG allows to control the projector with the remote control unit when you hold a button of
it for about 3 seconds, and makes MY BUTTON function as LONG KEY DISABLE/LONG KEY
ENABLE compulsorily. If you use these buttons to control the projector as you assigned with the
MY BUTTON menu, set to the NORMAL.
 ERROR RECOVERY
OFF : You need to unplug the projector's power cord to get back from the standby state with an
alert of LIGHT SOURCE ERROR or TEMPERATURE ERROR.
ON : You can get back the projector from the standby state with an alert of LIGHT SOURCE
ERROR or TEMPERATURE ERROR by holding the STANDBY/ON button for about 3
seconds. Unplug the projector's power cord when this operation becomes ineffective.
 INSTALLATION CONTROL
AUTO :
Adjusts optimum settings of fan and light source automatically according to the installation
conditions.
NORMAL :
Adjusts settings of fan and light source suitable for other than the installation conditions of
downward projection.
Use this mode when temperature error occurs in downward projection.
OTHER :
Adjusts settings of fan and light source suitable for the installation conditions of downward
projection.
Light source output can be kept low.
 SERIAL # CLEAR
Executing this item makes the serial # in the EASY MENU disappear. It is impossible to display
the serial # again once you do this operation. Do not execute this item in any cases except when
you use the MAIN PCB taken from one projector for another in repair work.
 NETWORK RESET
If this is executed, all of the network settings are initialized.
 SOFT RESET
When this is executed, all of the user data is initialized. Never use it if not required.
LWU650-APS/LWU530-APS
Service Manual
LWU650-APS / LWU530-APS
With the control panel
1. Press the MENU button to
display the ADVANCED MENU.
(If EASY MENU appears,
choose ADVANCED MENU.)
2. Select the OPTION on the
menu.
3. Press the ◄ button first, then
press and hold the ◄ and
INPUT buttons for 3 seconds.
90
With the remote control
1. Press the MENU button to
display the ADVANCED MENU.
(If EASY MENU appears,
choose ADVANCED MENU.)
2. Select the OPTION on the
menu.
3. Press the MAGNIFY OFF
button, then re-press and hold
the button for 3 seconds.
020-001522-01 Rev. 1 (11-2018)
LIT MAN SERV APS Series