Christie APS Series Service Manual page 71

■ POWER PCB FAN - 1
POWER HOLDER ASSY hole
FAN cable
Fix FAN after passing
Fan cable through
POWER HOLDER ASSY hole.
FAN cable
Sticking pressure: More than 19.6N
Make sure that there is no floating
(except at corners)/coming-off/
riding-over/adherence
of foreign material after sticking.
M3x29-W Silver
LWU650-APS/LWU530-APS
Service Manual
LWU650-APS / LWU530-APS
Fix the cable so that it will be along two detents
at the angle as shown in the drawing.
It is OK even if the lock faces in either direction.
Insert into the innermost of a
fixing hole to engage it firmly.
Attach FAN so that FAN cable will face in the
direction as shown in the drawing.
Attach FAN so that label will face in the
direction as shown in the drawing.
Reference
for sticking
Be careful not to misassemble.
Labeled side
70
Be careful not
to misassemble.
Reference
for sticking
020-001522-01 Rev. 1 (11-2018)
LIT MAN SERV APS Series
Detent
(projection)
View from
the bottom