Christie APS Series Service Manual page 92

11-2 RUN TIME window
 The product operating time display method (accumulated light source time display method)
1. Open the ADVANCED MENU and select SETUP - LIGHT & FILTER - LIGHT SOURCE HOURS.
2. Press the RESET button twice, then press GEOMETRY button of the remote control for 3
seconds or more to display the screen shown below. The menu will close after 55 seconds if there
are no further operations.
3. Use ▲/▼ buttons to select the usage status number. (The usage status is as shown below.)
LWU650-APS/LWU530-APS
Service Manual
LWU650-APS / LWU530-APS
← LIGHT SOURCE TIME
← LIGHT SOURCE TIME (CUSTOM)
← LIGHT SOURCE TIME (LIGHT 75%)
← LIGHT SOURCE TIME (LIGHT 50%)
← LIGHT SOURCE TIME (QUIET MODE)
← LIGHT SOURCE TIME (DIM)
← AC energizing time
← Number of times on
← Number of times off
← Usage status number
0 ..... Total usage status
1 ..... Current usage status
2 ..... Usage status before first reset
3 ..... Usage status before second reset
||
9 ..... Usage status before eighth reset
91
020-001522-01 Rev. 1 (11-2018)
LIT MAN SERV APS Series