Settings Included In A Profile - Dräger Infinity M540 Instructions For Use Manual

Operating concept

Settings included in a profile

The following table lists all of the settings included
in a patient profile. For details on each setting, such
as available selections and detailed descriptions of
the setting, refer to the cross-referenced pages.
Parameter
Parameter-specific profile settings
ECG
(see page 212)
Arrhythmia
(see page 225)
Arrhythmia alarm
settings
(see page 134)
76
Included settings
Size [mV/cm]
Size All ECG [mV/cm]
Pulse tone volume
Tone source
HR source
Waveforms
Leads
Filter
Pacer detection
QRS sync marker
ARR Processing
Resp. monitoring
Color
Alarm limits
Alarm on/off setting
Alarm archive setting
ARR mode
Alarm archive setting
Alarm priority (high,
medium, low or off)
Alarm priority
Rate
Count
Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n
Parameter Included settings
ST ST monitoring
(see page 234)
ST lead1
ST lead2
ST lead3
ST Mini Trend
TruST 12-lead
Event duration [s]
Selected isoelectric point
Selected ST measuring
point
Alarm on/off setting
Alarm limits
Alarm archive setting
Temperature Color
(see page 287)
Alarm on/off setting
Alarm limits
Alarm archive setting
SpO2 (Nellcor) Pulse tone volume
(see page 278)
Tone source
Waveform size [%]
SatSeconds alarm
Color
Alarm on/off setting
Alarm limits
Archive setting and alarm
priority for SpO2 check
sensor alarm
Alarm archive setting