Co2 Display; Co2 Parameter Field - Dräger Infinity M540 Instructions For Use Manual

Scio Monitoring
CO display
2
On the Cockpit, the CO
– CO parameter field
2
– CO waveform
2
The Cockpit supports a configurable parameter
field for display of CO
2
following displays:
– CO by itself (default)
2
– CO with O (only for gas analyzers with O
2 2
monitoring)
CO parameter field
2
The default CO parameter field displays the
2
current values for:
– Inspired CO (inCO
2
airway during inspiration phase.
– End-tidal CO (etCO
2
airway at the end of expiration.
– Respiratory Rate (RRc) – the patient's
respiratory rate, derived from the etCO
A B
etCO2
27
366
display consists of:
2
that allows one of the
) – the level of CO in the
2 2
) – the level of CO in the
2 2
signal.
2
C D E F
inCO2
0
RRc
70
20
21
I H
Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n
A etCO2 label
B etCO value – highest level of CO
2
during the expiratory phase within the
measurement interval
C etCO alarm limits (displays crossed triangle
2
symbol when etCO
D inCO label
2
E inCO value – the level of CO
2
2
during inspiration, taken as the minimum value
within the measurement interval
F inCO alarm upper limit (displays crossed
2
triangle symbol when the inCO
off)
G RRc alarm limits (displays crossed triangle
symbol when RRc alarms are turned off)
H RRc parameter label
I RRc value – respiratory rate derived from the
CO signal.
2
4
30
5
G
in the airway
2
alarms are turned off)
2
in the airway
2
alarm is turned
2