Transferring Profiles - Dräger Infinity M540 Instructions For Use Manual

Transferring profiles

You can transfer profiles over the network or with a
USB flash drive.
NOTE
Use a FAT32 flash drive for importing or exporting
profiles. USB flash drives with NTFS format do
not produce reliable results.
Only patient profiles can be transferred over the
network. See page 490 for details on how to
transfer shared system profiles.
NOTE
Whenever you use the transfer profile function, all
existing profiles for all patient categories are
transferred simultaneously.
Transferring patient profiles over the
network
Transferring patient profiles over the network is
only possible among Cockpits within in the same
monitoring unit. The following diagram shows the
Profile transfer page which consists of a list of
connected devices within the monitoring unit.
Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n
System setup
B
G
F
A Profiles tab
B Device name column
C Status column
D Profile transfer tab
E Start transfer button
F Clear selection button
G Select all button
System configuration
A
C
D
E
489