Viewing Medibus.x Parameter Data; Parameter Fields - Dräger Infinity M540 Instructions For Use Manual

Viewing MEDIBUS.X parameter data

The Cockpit displays parameter data originating
from connected MEDIBUS.X devices in the
following locations:

– Parameter fields

– Loops pages (see page 412)
– Trends pages (see page 163)
– Show all pages (see 413)

Parameter fields

NOTE
The following diagram shows a typical parameter
field layout. This layout may change when
additional parameters are put on display.
Parameter fields report parameter values and
indicate the alarm status of parameters. Parameter
fields can also report technical conditions such as
disconnected sensors, and so on. The content of a
parameter field can be configured. For more
information see page 414.
The following diagram shows a typical parameter
field for a MEDIBUS.X parameter.
A
F
Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n
The Cockpit displays the following waveforms,
loops, and parameters:
– Airway pressure waveform (Paw) and
– Expiratory flow waveform and associated
– CO
– Loops (flow-volume, pressure-volume)
A Primary parameter label
B Second parameter label
C Second parameter value
D Third parameter label
E Third parameter value
F Primary parameter value
B
C
D
E
External devices – MEDIBUS.X devices
associated parameter field
flow/volume (vent) parameter field
waveforms and associated parameter field
2
NOTE
The background of the Paw parameter field
appears cyan when a ventilator or an anesthesia
workstation becomes disconnected.
411