Overview Of Scio Monitoring - Dräger Infinity M540 Instructions For Use Manual

Scio Monitoring

Overview of Scio monitoring

The Scio Four module samples gas from the
breathing gas of pediatric patients and adults. It
continuously measures the concentration of CO
N O, and anesthetic agents (Sevoflurane,
2
Desflurane, Isoflurane, Halothane, Enflurane) in
the breathing gas as well as the O
(optional). All measured values as well as derived
values are communicated to a patient monitor.
WARNING
Risk of inaccurate gas measurement values
During warm-up, reported values may not be
accurate. Wait until the gas analyzer has com-
pleted initialization and warm-up. Refer to the
Technical Data appendix in the gas analyzer
supplement for further information regarding
gas analyzer accuracy.
WARNING
Risk due to defective sensors
If the gas analyzer is not ready for operation,
the patient will not be adequately monitored.
Before using the medical device, ensure a
suitable substitute monitoring.
WARNING
Risk of patient safety
The multigas information displayed is intend-
ed to be used by trained and authorized health
care professionals only.
NOTE
In this chapter, all Scio Four modules (Scio Four,
Scio Four Oxi, Scio Four plus, and Scio Four Oxi
plus) are referred to as "gas analyzer."
358
concentration
2
Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n
,
2