Co Setup Functions - Dräger Infinity M540 Instructions For Use Manual

External devices – MEDIBUS.X devices
CO setup functions
2
See page 414 for information on how to access this
page. The tab is labelled CO
connected. The tab is labelled CO
when an anesthesia workstation is connected.
Selection
CO Scale
2
Color
Menu selections when Anesthesia workstation tab is selected.
etCO2 parameter
field
CO Scale
2
Color
O2 parameter
field
Agent parameter
field
418
when a ventilator is
2
/O2/ Agent
2
Available settings
Menu selections when Ventilator tab is selected.
– 0 to 40 (default), 0 to 60, 0 to 80,
0 to 100 mmHg
– 0.0 to 5.0 (default), 0.0 to 8.0, 0.0 to 12.0,
0.0 to 16.0 kPa
– 0 to 5 (default), 0 to 8, 0 to 12, 0 to 16%
Red, green, blue, yellow (default), light blue,
purple, orange, white.
– etCO2 (default)
– etCO2/O2
– 0 to 40 (default), 0 to 60, 0 to 80,
0 to 100 mmHg
– 0.0 to 5.0 (default), 0.0 to 8.0, 0.0 to 12.0,
0.0 to 16.0 kPa
– 0 to 5 (default), 0 to 8, 0 to 12, 0 to 16%
Red, green, blue, yellow (default), light blue,
purple, orange, white.
– O2
– O2/N2O (default)
– Off
– Agent
– Agent/ xMAC (default)
– Agent/N2O
– Off
Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n
Description
Determines the scale of the
displayed CO waveform.
2
Determines the color of the CO
parameter field and waveform.
Determines the appearance of
the etCO parameter field.
2
Determines the scale of the
displayed CO waveform.
2
Determines the color of the CO
parameter field and waveform.
Determines the appearance of
the O parameter field.
2
Determines the appearance of
the Agent parameter field.
Note: If two agents are
detected, both are displayed
automatically.
2
2