Supported It Applications - Dräger Infinity M540 Instructions For Use Manual

IT applications (options)

Supported IT applications

If you dock a new M540 and admit the patient at the
Cockpit, the content of some application tabs
changes to reflect the data of the new patient.
Similarly, if you discharge a patient, all IT tabs
reflect that the patient is discharged. The following
table lists the supported IT applications.
Name of Application
Innovian Solution Suite
This application includes:
– Innovian Critical Care
(formerly known as
ChartAssist)
– Innovian
Perioperative Care
Infinity Symphony Suite
RemoteView (Gateway
PatientWatch)
Application
Web browser
Web application
506
Supported
software version
VF7.1
VF7
VF6 or higher
Citrix XenApp
server Versions 5,
6, 6.5
Up to Internet
Explorer 11 and
MicrosoftEdge
Up to Internet
Explorer 11 and
MicrosoftEdge
Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n
Browser emulation for Internet Explorer 7 to
Internet Explorer 11 and Microsoft Edge is
supported in all of the IT tabs except the Application
tab.
Description
Clinical flow sheet application.
The tab can be configured to display a single patient.
The single patient tab requires that the M540 is docked.
The Innovian waveform feature is not supported with the
IACS VG5 (or later) release.
Whenever you access the Innovian tab, the local patient
is displayed or the admit screen is presented if the local
patient has not yet been admitted to Innovian Solution
Suite application. For more information, refer to the
instructions for use Innovian Solution Suite.
An application that provides retrospective analysis of
patient data stored on the ICS. The tab can be configured
to run a single patient provided an M540 is docked. The
Symphony status page only displays ST-deviations that
are displayed in the parameter field.
Allows you to remotely view up to 4 different bedside
monitors from the Cockpit.
No wireless symbol (example:
PatientWatch screen when the M540 is in wireless mode.
PatientWatch is supported only in English.
Provides remote access to IT applications residing on the
Citrix server.
Provides access to HTML and HTML5 content.
Provides access to HTML and HTML5 content for a single
URL, including the Citrix Receiver.
) appears on the