Dräger Infinity M540 Instructions For Use Manual page 261

NOTE
The parameter SpHb changes to SpHbv (if
Venous was selected for the blood source setting
SpHb Cal – see page 269).
You can select up to three parameters to be
displayed in the parameter field (see page 266).
Units of measure appear next to the parameter
label if applicable and can be activated/deactivated
(see page 472).
The Pulse CO-Ox parameter field contains the
following elements:
A
H
A Parameter 1 Pulse CO-Ox label
B Parameter 2 Pulse CO-Ox label
C Upper/lower alarm limits or crossed triangle
symbols when alarms are deactivated (for the
parameters SpOC and PVI there are no alarm
limits)
D Parameter 3 Pulse CO-Ox label
E Parameter 3 Pulse CO-Ox value
F Parameter 2 Pulse CO-Ox value
G Alarm off symbol when alarms are deactivated.
When alarms are activated, the alarm limits are
displayed instead.
H Parameter 1 Pulse CO-Ox value
Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n
SpO2 and Pulse CO-Ox monitoring with Masimo SET MCable
B
F E
G
C
D
261