Dräger Infinity M540 Instructions For Use Manual page 213

Selection
Leads – Three electrodes: I, II, III
– Five electrodes: I, II, III, aVR, aVL, aVF, V
– Six electrodes: I, II, III, aVR, aVL, aVF, V, V+
– Six electrodes (with TruST activated): I, II,
– Ten electrodes: I, II, III, aVR, aVL, aVF, V1
– Default for lead 1: II
– Default for lead 2: V (with TruST and a 6-
– Default for lead 3: aVF
Size [mV/cm] 0.25, 0.5, 1 (default), 2, 4, 8 mV/cm
Color Red, green (default), blue, yellow, light blue,
purple, orange, white
Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n
Available settings
III, aVR, aVL, aVF, dV1, V2, dV3, dV4, V5,
dV6
to V6
wire lead set plus a 4-wire lead set, the
default is: V2)
Settings 2 page
ECG, arrhythmia, and ST segment
Description
Assigns specific leads for
each waveform depending on
which lead mode is selected.
Sets the scale of individual
ECG waveforms.
Determines the color of the
waveforms and parameter
labels and values.
213