Configuring The Router Using The Web Interface - MB Connect Line mbNET MDH810 Manual

12.4.1.2

Configuring the router using the web interface


The connection wizard helps you to configure your connections quickly and easily. To access the wizard,
click on the Wizards link at the top right of your browser. If you have disabled the autolaunch function for
wizards, click on the Start button for the Internet connection wizard.

Now select the option for External DSL modem.

Enter your Internet login details. You can obtain these from your Internet Service Provider.

You can also choose whether the mbNET should send you an email, use a dynamic DNS service, or be
accessible over the Internet via MB Connect Line's DynDNS.

Confirm and save your entries. Finally, the mbNET must be restarted to fully implement the settings.
From the home page of the configuration interface, click
play the screen shown below. Follow the instructions below.
For a detailed description of
12.2
Label
Interface Type
Connection Type
PPP User Login
PPP User Pass

Save your changes by clicking Save Changes.
Page 58 of 226
Version: 3.3.5 – DR05 – 23.03.2017
–
Network WAN
Select DSL here.
If you are in Germany, select PPPoE (most commonly used protocol in Germany).
PPTP is most common in Austria.
Enter your Internet access user name. Use the name provided by your ISP.
Enter your Internet access password. Use the password provided by your ISP.
–
Network WAN
settings, please see section "Network – WAN"
Description
and then the Outgoing tab. This will dis-