Network - Modem - Callback - MB Connect Line mbNET MDH810 Manual

Network – Modem – Callback
16.3.4
The settings below apply to the call back function. This function triggers Internet dial-in remotely via a telephone or
dial-up connection. It must be set up so that the Internet connection will be established via WAN or modem.
Note that call back does NOT work with UMTS-enabled devices.
Label
Call back enable
How to
call back
Page 120 of 226
Version: 3.3.5 – DR05 – 23.03.2017
Checking this option enables the call back function.
Activate Call Back via Phone:
With this setting, the mbNET will connect to the Internet if called from a phone. To es-
tablish a connection, the mbNET must be alerted by four rings. After this happens, the
mbNET hangs up and then starts Internet dial-in. This can take 30-40 seconds.
Log in and press a button:
With this setting, the mbNET will connect to the Internet if you have set up a dial-up
connection with the mbNET and you click on the Call Back button in the
menu of the user interface. After 30 seconds, the mbNET will establish an Internet con-
nection unless you close the dial-up connection.
Description
–
System Info