Factory Settings On Delivery; Username And Password; Ip Address Of The Router; Loading The Factory Settings - MB Connect Line mbNET MDH810 Manual

Factory settings on delivery

24.
24.1

Username and password

The router is shipped with the following username and password:
Username: admin
Password: No password required
24.2

IP address of the router

The router is set to the following IP address in the factory:
IP address: 192.168.0.100

Loading the factory settings

25.
Follow the steps outlined below to reset the industrial router to the factory settings:
IMPORTANT: You should first back up your configuration. Once you have carried out these steps, your
previous settings will no longer be available.
1. Switch on the device
2. Wait until the Rdy LED blinks
3. Press and hold the dial-out button until the Fc4 / TxD2 LED lights up
4. Press the dial-out button again (Fc3 / RxD2 lights up)
5. Press the dial-out button again (Fc2 / TxD1 lights up)
6. Finally press the dial-out button one last time
The custom configuration is then deleted, the industrial router is reset to the factory settings and
can be reconfigured.
IMPORTANT: The IP address of the industrial router is reset to 192.168.0.100. The computer's network set-
tings must be changed accordingly.
Page 216 of 226
Version: 3.3.5 – DR05 – 23.03.2017