MB Connect Line mbNET MDH810 Manual page 73

Label
Enable
Autoconfig
Local IP address or
Range
Remote IP address or
Range
Give DNS address to
the client
Give WINS address to
the client
Encryption
Authentication via
PAP, CHAP, MS-CHAP,
MS-CHAP V2
Note that when using MPPE encryption,
You must ALWAYS use MS-CHAP or MS CHAP v2 as the authentication method.
To enable the connection, check the box by clicking on it.
Selecting "yes" means that the mbNET's local network range and IP address will be used.
By selecting „no", you can enter this information manually.
This is the PPTP server address
Enter the address or address range of dial-up clients here.
Here, enter the address of the server currently providing name resolution. Usually, you can
enter the PPTP server address here.
The WINS server IP address can also be entered here for compatibility with older Microsoft
operating systems.
This option selects the type of data encryption.
□
MPPE V2 All
□
MPPE V2 128
□
MPPE V2 40
□
None
You should only select "none" if it is for test purposes. The data will not be trans-
ferred securely.
You can select which authentication methods your PPTP server will support here. Place a
check next to your chosen methods and click on Save Changes. Make sure that the client
is also using one of the supported authentication methods, otherwise it will not be able to
connect.
For more detail on VPN
Description
–
PPTP please see section
VPN – PPTP
Page 73 of 226
Version: 3.3.5 – DR05 – 23.03.2017