MB Connect Line mbNET MDH810 Manual page 69

Setting up the router for a VPN connection (continued)
 Here, enter either the DynDNS service forwarding
name, or the current IP address of the router.
Note:
 The example in Figure 86 uses an IP address assigned by
the ISP.
For information on setting up and using the MB Connect Line DynDNS service, please see
section
When entering the router's IP address, make sure that you always enter the current IP address (the IP ad-
dress changes every time the router connects to the Internet).
 Now you can select if the connection should be
created for all users or only for the current us-
er.
 Now add a desktop shortcut to the connection.
 The VPN connection is now set up.
Network – DynDNS
Page 69 of 226
Version: 3.3.5 – DR05 – 23.03.2017