MB Connect Line mbNET MDH810 Manual page 55

Please Note: The internet-by-Call providers are changing their prices often. MB
Connect Line cannot be made responsible for any price changes.
 Now click on
Network
Label
Internet Connection
Connection Mode
Lock connection by
Broadcast IP address via email
Email
For a detailed description of the

Save your changes by clicking Save Changes.

Click on System
specific rights, please see section

Finally, to save your changes permanently to the industrial router, click Apply Changes.
For devices to be able to communicate with the LAN interface, they must be config-
ured using the mbNET LAN interface IP address as the device gateway. Communi-
cation is not via PPP addresses, but via the mbNET LAN interface IP address and
the IP addresses of connected devices.
–
Internet and enter the following settings.
From the drop-down field, select the setting
Internet via WAN
Select Keep connection
Using the drop-down field you can decide whether the Internet con-
nection should be closed when one of the inputs receives a signal
(internally-generated, between 10 and 30V).
Enable this setting.
Select whether the IP address should be sent to the
email address listed.
Enter the email address to which the IP address is to be sent here.
–
Network Internet
–
User and add a user with dial-in rights. For further notes on adding users and assigning
Adding users
Description
settings, please see section
Network – Internet
Page 55 of 226
Version: 3.3.5 – DR05 – 23.03.2017