Web - MB Connect Line mbNET MDH810 Manual

11.5

WEB

Label Description
HTTP Port Specify the port on which your http-Server is reachable.
Important:
If you change the port then you can reach your router only by typing the new port behind
the IP address, into the address-line.
e.g.: 192.168.0.100:84
Enable HTTPS
If you check this checkbox, you activate the safe variant of HTTP (HTTPS -> Hyper Text
Transfer Protocol Secure) for the communication with the router over the web interface.
Important!
After enabling this setting, your router is no longer reachable over http://..... Now you
have to write: https://......
HTTPS Port You can change the port under which your HTTPS Server is reachable here.
Important!
If you change the port then you have to type the new port in the address bar of your
browser: e.g.: 192.168.0.100:84
Page 39 of 226
Version: 3.3.5 – DR05 – 23.03.2017