Connection Settings; Network Settings - MB Connect Line mbNET MDH810 Manual

19.1.1.1

Connection settings

Tab
Active
Connection name
Connection type
Link connection
Connection Set-
(only with a router-router
tings
connection)
Peer address (IP, DNS)
(only with a router-router
connection)
19.1.1.2

Network Settings

Label
Check this box to activate the VPN connection.
Enter a name for the connection in the input field.
Select the connection type
Router <> Router Connection or
Client <> Router Connection via the drop-down field.
Please note that to communicate with another router, this
router must be configured for accessing the Internet and for
requests from clients.
With a router-router connection, one of the following op-
tions for establishing a connection must be selected:
Connect immediately:
A connection is established following a restart or boot rou-
tine.
Connect on traffic
The connection with the router or remote network is estab-
lished in response to requests from the local network.
Wait for incoming Connection
The router on standby is the so-called VPN server. It waits
for incoming connections.
The appropriate peer address must be specified on the router
responsible for the outgoing connections. This can be an IP
address or even the DNS name under which the remote
router can be reached.
Description
Version: 3.3.5 – DR05 – 23.03.2017
Page 159 of 226