Upgrade Via Network - MB Connect Line mbNET MDH810 Manual

15.7.2

Upgrade via Network

In this case you need to enter the IP address of a TFTP server, and the firmware name.
In this case: image.bin
Before the upgrade can start, the "tftpd32" tool must be launched. You can download this free of charge at
http://tftpd32.jounin.net/
Once you launch the tool, enter the following settings in the "DHCP server" tab:
IP pool starting address:
Size of pool:
Mask:
Clicking on Save will store the settings. In the drop-down field under "Current Directory", you
need to select the folder where the firmware upgrade file is saved. Do not close the tool until the
upgrade is complete. Now, in the web interface TFTP Server field, you need to enter the IP of the
computer that is currently running Tftpd32. Now click Start. Once the process is complete, restart
the device
Page 110 of 226
Version: 3.3.5 – DR05 – 23.03.2017
.
IP address of the router that you are upgrading.
10
Network subnet mask
ATTENTION!
Never interrupt the firmware update as the device can not
start any more!
The update process can take up to 10 minutes