MB Connect Line mbNET MDH810 Manual page 125

The Settings tab is only displayed if Internet connection via WAN or modem has been selected along with On
Connect on traffic
Connect when pushing Dialout
button
Connect on Sign 1 at Input
Close connection after ... [s] in-
activity
Internet settings
Settings
demand for the connection mode.
The following settings options will be displayed:
To connect to the Internet when a data packet is sent, check this box. In oth-
er words, an Internet connection will be established if the LAN is trying to
contact a subscriber outside of the LAN.
If you wish an Internet connection to be triggered by pressing the Dial out
button on the front of the router, check this box.
ADVICE:
Press and hold the Dial Out button until the Con LED starts to flash.
 Don't connect:
Select this option if you want to prevent the Internet connection from be-
ing triggered by a signal to one of the digital inputs.
Input1, Input2, Input3, Input4:
Select this option if you want to establish a connection using a signal to the
selected digital input.
Here, enter the length of time before the connection should be closed if the
router has sent no further data packets in the interim. Leaving this blank
switches off the function.
Page 125 of 226
Version: 3.3.5 – DR05 – 23.03.2017