Multi-Client: Multiple Clients Can Dial In - MB Connect Line mbNET MDH810 Manual

Server – authentication with certificates
With authentication with certificates, multiple clients can dial into the server simultaneously and
are automatically assigned an IP address from the "Client IP address pool".
There are two different operating modes in server mode with certificates.
Single client: Only one client can dial in
Tab
Network Settings
No network setting is needed on the client because it is sent to the client by the server.
The local network and the peer network must be specified. OpenVPN then creates
the necessary routing entries using these entries.
19.3.2.2

Multi-client: Multiple clients can dial in

Page 176 of 226
Version: 3.3.5 – DR05 – 23.03.2017
Label
can dial into the server (not simultaneously) and are automati-
Client IP address
cally assigned an IP address from the "Client IP address pool".
pool
Enter the address range in CIDR notation. E.g. 10.1.0.0/24
Enter the address range of the local network in CIDR notation
Local network here.
E.g. 10.1.0.2/24
"no" selected
Multiple peers with
different network
Each client is assigned the peer network address range, which
addresses can es-
tablish a VPN con-
nection.
Enter the network address of your peer in CIDR notation here
Peer network
(192.168.99.0/24).
With authentication with certificates, multiple different clients
means that simultaneous client logins make no sense here.
Description