Settings For Connecting Two Industrial Routers - Pptp - Server - MB Connect Line mbNET MDH810 Manual

Settings for connecting two industrial routers – PPTP – server
12.7.1
Note: Not possible with mbNET variant with WLAN (FW 4.1)
□
From the home page navigation
bar on the left, click
VPN and on the navigation bar at
the top click PPTP.
□
This will display the screen below.
If you now set the "Enable" box and save this setting, your server is live. It will then provide dial-in clients with
addresses from its local network and use its LAN address as the PPTP server address.
If you wish to use other addresses,
set the "Autoconfig" option to
picture on the right:
Page 72 of 226
Version: 3.3.5 – DR05 – 23.03.2017
NO and you will see the