System Settings; System - Web - MB Connect Line mbNET MDH810 Manual

System settings

15.
The most important system settings have already been outlined above in
A more detailed explanation of additional system settings is given below.
System – WEB
15.1
Using HTTPS (Hypertext Transfer Protocol Secure; detects https: //... in the browser window) encrypts
the connection between web browser and web server. Encryption is usually 40 or 128 Bit, depending
on key size.
Label
The standard port for HTTP requests is TCP 80. You can change this if you need this
port for your OpenVPN connection or if it is already being used for another purpose. If
HTTP Port
you do this however, note that you will need to enter the port in the browser along with
the address. (Firmware versions 2.0.1 and higher)
Enable HTTPS Clicking on the check box enables the secure Hypertext Transfer Protocol.
To allow remote station access, you need to enter the router IP address and the port.
HTTPS Port
In this case: Port 443
System Settings.
Description
Version: 3.3.5 – DR05 – 23.03.2017
Page 95 of 226