Access The Web Interface Of The Router - MB Connect Line mbNET MDH810 Manual

Access the web interface of the router

10.
Proceed as follows:
Open your browser and enter the router's IP address in the address bar:
The factory setting is: 192.168.0.100
Log into the router using the following login data:
□
Username:
□
Password:
First Start on the Web interface.
Here you can select between the adjustment "Cloudserver" and "Classic router"
With the setting "Cloudserver", you can connect to the portal mbCONNECT24 and synchronize your configuration
via CTM (Configuration Transfer Manager) to the device.
If you selected the adjustment "Classic router", you can create a router without a connection to the portal mbCON-
NECT24, but you can create a VPN-connection on your own.
admin
no password required
Page 25 of 226
Version: 3.3.5 – DR05 – 23.03.2017