Network - Modem - Sms - MB Connect Line mbNET MDH810 Manual

Network – Modem – SMS
16.3.5
Label
Enable Service Con-
trol via SMS
Check the Phone
Number of the
Sender
Send an SMS when
Internet Connection
Established
Please note that your cell numbers cannot begin with 0. You must use the international format
e.g. +49 for Germany.
This function enables the use of service control via SMS
This ensures that the mbNET only accepts SMS commands from a specific number.
Then enter the sender's cell number in "Senders Phone Number" in the next field.
Commands sent from any other number will now be rejected.
The mbNET can send you an SMS as soon as it has connected to the Internet. In the
next field, you also need to enter the telephone number to which this SMS should be
sent.
Description
Version: 3.3.5 – DR05 – 23.03.2017
Page 121 of 226