System - Firmware; Upgrade Via Usb - MB Connect Line mbNET MDH810 Manual

System – Firmware
15.7
There are two ways to update the industrial router's firmware, both are described on the following
page.
15.7.1

Upgrade via USB

This requires a USB storage device to be connected to the industrial router so that the file can be
transferred across. The firmware name (image.bis) is listed here. To upgrade the firmware, click
Start. Then restart the device.
Use the image.bis data.
ATTENTION!
Never interrupt the firmware update as the device can not start any more!
The update process can take up to 10 minutes.
Page 109 of 226
Version: 3.3.5 – DR05 – 23.03.2017