MB Connect Line mbNET MDH810 Manual page 75

Label
Enable
Name
Host name or IP
Local IP
Remote IP
Authentication
Encryption
User & Password
Start connection
on
.
To enable the connection, check the box by clicking on it.
Assign a name to the client.
In the example we used: PPTPclientConnection
Here, enter the name or IP address that the client uses to contact the server. In the exam-
ple, this is: 123456789@mbNET.mymbnet.biz
The server address can be entered here. Generally speaking, this field can be left blank.
Enter the address of the remote station, or the address for a whole network. We recom-
mend entering a network address. In the example: 192.168.0.0/24. Note the CIDR notation
(/24 after the network address)
Select an authentication method that is also enabled in the server settings.
We recommend selecting MPPE V2 encryption. Note that if you select "none", your data
will NOT be sent securely.
Enter the user name and password of a user who has been added to the PPTP server as a
system user (e.g. ADMIN, without password).
Select Keep connection. A connection will be established on restart or boot up. It is also
possible to start the connection only for specified events.
Description
Version: 3.3.5 – DR05 – 23.03.2017
Page 75 of 226