System - Configuration - MB Connect Line mbNET MDH810 Manual

15.6

System - Configuration

Using this menu, you can both backup and restore a system configuration.
The configuration can be saved e.g. to a connected USB drive before making major changes, and if nec-
essary, restored onto the industrial router.
Label
Name this configuration
Backup (Button)
Include certificates and
keys
Save on USB device
Overwrite existing file
Encrypt the configura-
tion (.mbns)
Backup Configuration
Assign a meaningful name to the configuration.
In this case: mbNET
Backs up the configuration. After clicking on this button you will be prompted to enter
a location, e.g. the USB drive letter.
This configures the system to copy an mbNET. Please note that this configuration file
should only be used for one device.
If a USB storage medium is connected, the configuration can also be stored there.
If this option is not enabled, and a configuration file already exists at the same loca-
tion, the new configuration will not be stored. Either change the name of one of the
files, or choose a different save location for the new configuration.
set: The config file will be encrypted.
not set: The config file will NOT be encrypted.
Description
Version: 3.3.5 – DR05 – 23.03.2017
Page 107 of 226