Serial Ports Configuration - Digi Connect WAN Series User Manual

Digi Connect WAN Family web interface
WiMAX Networks: A list of networks that are available for connections. The radio discovers
n
these networks over the air during the scanning process. While connected, this list shows the
networks found prior to connecting and will not be updated.
Name: The name of the network access provider (NAP) that provides network connectivity.
l
Type: The relationship to the subscribed network service provider. The possible
l
relationship types are as follows:
Home: The network service provider operates the network.
o
Partner: A partner of the network service provider operates this network.
o
Roaming: The network provides roaming access for the network service provider.
o
Unknown: The network may not allow connections for the network service provider.
o
NAP-ID: The identifier of the network access provider.
l
RSSI: Received signal strength indicator. A measure of the signal level of the network.
l
CINR: Carrier to interference and noise ratio. A measure of the signal quality of the
l
network.
Refresh: Update the list of available networks. Use this to see latest results of the
l
scanning process.
Scan: Perform a wide-area scan for additional networks. Use scan to find unused networks
l
on channels in the subscriptions list. The current network will be disconnected.
The scan takes a few minutes to complete. During this time, you can update the list of
networks by clicking Refresh and you can restart a connection by clicking Connect.
Connect: Click to connect to the selected subscription and network. The connection
l
process takes a few seconds to complete. If a connection cannot be made, the Digi device
will try to connect repeatedly until a it establishes a connection or you click Disconnect.
Disconnect: Click to disconnect from the Digi device from the current network. The radio
l
will scan for available networks while not connected.
Additional WiMAX configuration information
For additional information on configuring and activating WiMAX settings, see Digi Quick Note: Digi
Connect WAN 4G and ConnectPort Sprint/CLEAR 4G Configuration, available on the

Serial ports configuration

Use the Serial Ports Configuration page to establish a port profile for each serial port on the Digi
Connect WAN Family product. The Serial Ports Configuration page includes the currently selected port
profile for the serial port, detailed configuration settings for the serial port, dependent on the port
profile selected, and links to basic and advanced serial settings.
The Serial Port Configuration page includes the Port Settings pane that lists the available ports and
allows you to configure or copy selected ports.
Select Port Profile
The Select Port Profile page appears when you click Change Profile on the Port Profile Settings
pane.
Digi Connect WAN Family User Guide
Configuration through the web interface
Digi support site.
101