Digi Connect WAN Series User Manual page 187

SNMP device monitoring capabilities
DIGI enterprise MIBs
n
DIGI CONNECT DEVICE INFO MIB—A Digi enterprise MIB for handling and displaying basic
l
device information, such as firmware revisions in use, device name, IP network
information, memory use, and CPU statistics.
Digi Connect Mobile Information MIB—A Digi enterprise MIB for handling and displaying
l
device information for mobile devices.
Digi Connect Wireless LAN MIB—A Digi enterprise MIB for handling and displaying basic
l
device information for wireless devices.
DIGI SERIAL ALARM TRAPS MIB—A Digi enterprise MIB for sending alarms as SNMP traps.
l
Digi Login Traps MIB—A Digi enterprise MIB that indicates when users attempt to sign into
l
the device, and whether the attempt was successful.
Digi Structures of Management MIB—A Digi enterprise MIB that provides data structures
l
for managing hosts and gateways on a network.
Digi Connect Mobile Traps MIB—A Digi enterprise MIB for sending alarms as SNMP traps for
l
mobile devices.
Digi Connectware Notifications MIB—This Digi enterprise MIB may be required by some
l
SNMP import facilities, as other MIBs may refer to it.
See Download a Digi MIB
SNMP configuration
You can configure basic network and serial configurations for Digi Connect WAN Family devices
through SNMP:
Use a subset of standard MIBs for network and serial configuration. See
n
MIBs for more information on supported MIBS.
Use Digi enterprise MIBs for device identification, alarm handling, and Digi Connect WAN
n
Family-specific configurations.
To use the MIBS, you must load MIBs into a network management station (NMS).
Note that some SNMP configuration settings can be configured only from the web or command line
interfaces. For example, to send alarms as SNMP traps:
In the web interface, use the Configuration > Alarms > alarm > Alarm Destinations > Send
n
SNMP trap to following destination when alarm occurs option. See
In the command-line interface, use the set alarm option typescript. See the set alarm
n
command description in the Digi Connect® Family Command Reference on
Note You cannot configure all network and serial configurations using SNMP. For more advanced
configuration settings, use the web or command-line interfaces.
Digi Connect WAN Family User Guide
for instructions on downloading a Digi MIB from the Digi website.
SNMP configuration
Supported RFCs and
Alarms Configuration.
www.digi.com.
187