Digi Connect WAN Series User Manual page 135

Digi Connect WAN Family web interface
Static position settings
The static position settings define latitude and longitude coordinates for the Digi device. You can query
these parameters with the RCI protocol and applications, such as the Remote Manager, can use this
information.
Latitude: The static latitude of the device, in degrees (-90.0 - 90.0).
n
Longitude: The static longitude of the device, in degrees (-180.0 - 180.0).
n
Geofence settings
You can define up to 16 geofences. To add a geofence, click the Add button. The configuration settings
for the geofence appear.
General settings
Name: A name to reference this geofence. This name will appear in the event log, SNMP trap,
n
and/or e-mail report.
Latitude: Latitude of the center of the geofence, in degrees (-90.0 - 90.0).
n
Longitude: Longitude of the center of the geofence, in degrees (-180.0 - 180.0).
n
Maximum HDOP: This is the maximum tolerated horizontal dilution of precision that is allowed
n
for reporting a geofence event. When the reported HDOP is greater than this value, fence
event log reports, SNMP traps, and e-mail reports will not be sent. HDOP tolerances vary by
receiver.
Entry Radius: The entry radius, in meters, is the distance from the center of the fence for
n
entry. That is, if the device is less than this distance from the defined center, an entry event
has occurred.
Exit Radius: The exit radius, in meters, is the distance from the center of the fence for exit.
n
That is, if the device is more than this distance from the defined center, an exit event has
occurred. This is also the distance used to determine if the device is outside of the fence for
update events.
Location Update Interval: The location update interval, in seconds, specifies the amount of
n
time to wait between reporting that the device is outside of the geofence. This applies to event
log, SNMP, and e-mail reports.
Email settings
Notify on Fence Entry: An email will be sent to the defined recipients via the configured SMTP
n
servers when the device has entered the geofence defined by the geofence center and entry
radius.
Notify on Fence Exit: An email will be sent to the defined recipients via the configured SMTP
n
servers when the device has left the geofence defined by the geofence center and exit radius.
Digi Connect WAN Family User Guide
Configuration through the web interface
135