Table of Contents
Advertisement
Digi Connect WAN Family web interface
Manage alarms through Remote Manager
You can configure the alarms sent to Remote Manager. You can also view and manage alarms from
the Remote Manager interface. See
Users
User settings involve several areas:
User authentication: Whether authentication is required for users accessing the Digi Connect
n
WAN Family device and the information required to access it. You specify whether the user
authentication is a user name and password or an SSH public key. Depending on the Digi
device, you can define multiple users and their authentication information. User authentication
settings are on the Users settings page.
User access settings: Device interfaces that a user can access, such as the command line or
n
web interface.
User permissions settings: Permissions a user has for accessing and configuring the device.
n
Network configuration settings to further secure your device: Digi devices with cellular
n
capability present additional security considerations, mainly involving securing the border
between the Digi device and the cellular network. Several settings on the Network
Configuration pages are available to further secure the Digi Connect WAN Family product. For
example, you can disable unused network services on the Network Services page. On the IP
Filtering page, you can allow access from a specified devices and networks, and drop all other
connection attempts.
About user models and user permissions
For Digi devices that have a one-user model:
By default, there is no login prompt.
n
The default name for user 1 is root. This user is also known as the administrative user.
n
The Digi Connect WAN Family products provides the following user models:
Two-user model
n
More than two-user model
n
To determine which user model to implement:
In the web interface, if the menu includes Users, the Digi Connect device uses either the two-user
model or the more than two users model.
In the command-line interface, issue a show user or set user command. In the command output, note
how many user IDs are defined: one, two, or more than two. Or, issue a set user ? command and note
the range for the id=range option. If the id=range is not listed, there is only one user. Otherwise, the
range for user IDs appears. These commands are described in the Digi Connect® Family Command
Reference.
Two-user model
User 1 has a default name of root. This user is also known as the administrative user.
n
User 1 has default permissions that enables it to issue all commands.
n
You can change permissions for User 1 to be less than the default root permissions.
n
User 2 is undefined. That is, the user does not exist by default, but you can define User 2.
n
Digi Connect WAN Family User Guide
Alarms Configuration
for more information.
Configuration through the web interface
130
Advertisement
Table of Contents
