Digi Connect WAN Series User Manual page 78

Digi Connect WAN Family web interface
SIM card selection and settings
The Digi device may be equipped with one or two Subscriber Identity Module (SIM) cards. A SIM card
contains the account information associated with a particular mobile service provider.
All of the settings available on the Mobile Configuration page are stored individually for each SIM card.
SIM card settings include:
SIM: Select the SIM card identified by the slot number.
n
Set as Primary: Click to make this the preferred SIM to use to establish mobile connections.
n
IMSI: The International Mobile Subscriber Identity (IMSI) number that uniquely identifies the
n
SIM card.
Phone Number: The phone number associated with the mobile account, if available.
n
Note that the IMSI and phone number may not be available until the SIM attempts a
connection.
Status: The configuration status of the SIM. It may be one of these values:
n
Not configured: A mobile service provider has not been configured. Select a provider from
l
the list under Mobile Service Provider Settings.
Disabled: The SIM will not be used to establish a mobile connection. To enable, click Apply
l
under Mobile Settings.
Not installed: The SIM card is not plugged into the Digi device server.
l
Primary: This is the preferred SIM to use to establish mobile connections.
l
Secondary: If you cannot establish a connection the primary SIM, a connection will be
l
established with the secondary SIM.
Mobile settings
Mobile service provider settings
The Mobile Service Provider settings identify the service provider to use in connecting to the mobile
network. Information displayed varies by product and whether the remote service provider is GSM- or
CDMA-based. Settings that may be displayed on this screen include:
Service Provider: For GSM-based mobile service providers, this is the service provider to use in
n
connecting to the mobile network. The service provider must match the provider that supplied
the SIM card. This must match the provider that supplied the SIM card. (Not displayed for CDMA
products.)
Service Plan: For GSM-based mobile service providers, this is the service plan to use in
n
connecting to the mobile network. This setting must match the plan that the service provider
has supplied to you. This is also sometimes known as the APN (Access Point Name).
Username and Password: For GSM-based mobile service providers, these settings are the user
n
name and password of the mobile connection needed to access the mobile network.
Digi Connect WAN Family User Guide
Configuration through the web interface
78