Digi Connect WAN Series User Manual page 201

Specifications and certifications
Product
Digi Connect WAN 3G
Digi Connect WAN 3G IA FCC Part 15 Subpart B
Europe
The Digi Connect WAN Family is certified for use in several European countries. For information, visit
www.digi.com/resources/certifications.
If the Digi Connect WAN Family is incorporated into a product, the manufacturer must ensure
compliance of the final product with articles 3.1a and 3.1b of the RE Directive (Radio Equipment
Directive). A Declaration of Conformity must be issued for each of these standards and kept on file as
described in the RE Directive (Radio Equipment Directive).
Furthermore, the manufacturer must maintain a copy of the Digi Connect WAN Family user manual
documentation and ensure the final product does not exceed the specified power ratings, antenna
specifications, and/or installation requirements as specified in the user manual. If any of these
specifications are exceeded in the final product, a submission must be made to a notified body for
compliance testing to all required standards.
OEM labeling requirements
The 'CE' marking must be affixed to a visible location on the OEM product.
CE labeling requirements
The CE mark shall consist of the initials "CE" taking the following form:
Digi Connect WAN Family User Guide
Digi Connect WAN Family regulatory information and certifications
Emissions Immunity
FCC Part 15 Subpart B EN55024
Class B
IEC-003
AS/NZS CISPR 22:2006
VCCI V-3 2007.04
EN55024
Class B
IEC-003
AS/NZS CISPR 22:2006
VCCI V-3 2007.04
Safety
IEC/EN60950
UL/CUL 60950
IEC/EN60950
UL/CUL 60950
201