Digi Connect WAN Series User Manual page 159

Digi Connect WAN Family web interface
1. Power off the Digi Connect WAN Family.
2. Locate the Reset button or pin on your Digi device.
3. Hold the Reset button down gently with a non-conductive, small diameter tool (such as wood
or plastic) with a blunt end (NOT SHARP or the button could be damaged). Power on the device
while holding the Reset button down. On some models, after a few seconds you may see the
Status LED blink a 1-1-1 pattern once.
Digi Connect WAN Family User Guide
Administration
159